Winter is the time when you need your water heater the most. As the temperature falls down, you want to have your bath and water more steamy. As the water in your home is coming from outside, the water pipes get colder. This means that the water running through these pipes will also become colder. So, your water heater may need to work harder to heat the water. To make sure you do not require any water heater services during the winter, follow the steps given down.
Check the Pressure Relief Valve
The temperature and pressure relief valve (TPR) is vital for the heater to work properly. When temperature and pressure increase, the valve helps to release the water automatically. To check the valve first, you would have to turn off the water and power supply. You can find the lever on the top or side of the water tank. Then lift the lever and see if little or no water is coming out of the valve and water is coming out after it is closed, then the valve needs to be replaced.
Inspect the Anode Rod
Anode rod is an essential part of the water heater tank, as the anode rod attracts all the corrosive elements in water and protects the tank from getting rusted. An anode rod can last up to five years, but you have to check it annually. Inspecting the anode rod before winter is essential. If the anode rod is corroded or coated with calcium, then the anode rod needs to be replaced.
Flush Out the Tank
Sediments can easily buildup in your water heater tank and can coat up to its sides, making the water heater to work harder for heating the water. Flushing the tank would be essential before the winter. To flush out, first, you have to turn off the water and power supply. Then attach a hose to the drain valve in the tank and the other end should be in the floor drain, then open the drain valve. Once the tank gets clear to open the water supply back on, this will help to stir up the sediments with water and then drain. Repeat the process until the water comes out clean. You can also call the water heater services for flushing the tank.
Insulate the Tank
You have to make sure that the water remains hot in the winter. For that, the best you can do is insulate your tank and pipes. Insulating the tank and the pipes will prevent to reduce the heat loss. Insulating your water heater will also save you a good amount of energy. Newer water heater tanks already have insulation, but if your tank is old, then you can buy an insulation cover or even consider buying a new water heater.
These are some of the tips that you might need desperately for your water heater this winter. In the Fraser Valley, we are amongst the best water heater service providers. You can contact us for any plumbing services.